Glidden® Diamond® Interior Paint + Primer Flat

  • bvseo_sdk, net_sdk, 3.2.0.0
  • CLOUD, getAggregateRating, 32ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Glidden Diamond Interior Paint and Primer delivers exceptional durability
that keeps your walls looking great. Its outstanding washability,
scrubbability and stain resistance make it a smart solution for any high
traffic areas. Glidden Diamond delivers advanced leveling, leading to a
smooth application process and finish. With Glidden Diamond you can
be confident you'll achieve lasting results.


Sheens:
Sheens:
This product is available in the sheens listed. Available options are listed from least shiny to most shiny. For help selecting which options is right for you search "sheen guide"
Sizes:
Sizes:
This product is available in the sizes listed. For help determining how much paint you need for your project search "paint calculator"

Benefits

Excellent Hide & Coverage

This interior paint does an excellent job covering up that last paint job from the previous tenant, owner or any 'what-was-I-thinking' moments you've recently had

Highly Scrubbable, Washable & Stain Resistant Interior Paint

Spills or splashes? Kids or dogs? Yea, it can definitely handle those. Feel free to wash all of that stuff off!

Low Odor, Zero VOC*

Paint your room with this interior paint and get it back in action before you know it. *Colorants added to this base paint may increase VOC level significantly depending on color choice.

Details

Area Preparation:

Surface must be clean and dry. Remove all loose, peeling paint, dirt, grease, and any other surface contaminants. Putty all nail holes and caulk all cracks and open seams. Sand all glossy, rough, and patched surfaces. Plaster, concrete, and masonry surfaces must be completely dry, free
of efflorescence, and allowed to cure for 30 days prior to painting. When applied to an uncoated substrate or to bare wood, two coats are required with the first coat acting as the primer. Uncoated substrates, repaired surfaces, or lightly stained areas may require additional coats. For severe stains, water marks, and other challenging conditions, such as bare metal or chalky surfaces, use an appropriate specialty primer.
WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR
FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO
AVOID EXPOSURE. Wear a properly fitted, NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances
that may be released during surface preparation.

CONCRETE: New concrete should cure for at least 30 days and preferably 90 days prior to painting. The pH of the substrate must be less than
10 before painting.

CONCRETE/MASONRY BLOCK: Mortar should cure for at least 30 days and preferably 90 days prior to painting. Fill block with an appropriate block filler. Surfaces previously coated with water thinned cement-based paint must be prepared with extra care. If the material appears to be adhering tightly, a masonry sealer may be applied to seal the surface. Check adhesion by applying a piece of masking tape. If the sealer peels
off and has loose particles, remove all chalking or crumbling material, re-seal and re-check adhesion.

FERROUS METAL: The surface must be cleaned thoroughly to remove any dust, rust, and surface contaminants, and then primed.

GYPSUM WALLBOARD-DRYWALL: Nails or screws should be countersunk, and they along with any indentations should be mudded flush with the surface, sanded smooth and cleaned to remove any dust, prior to painting the substrate.

PLASTER: Plaster, hardcoat, skim coat, or other alkaline surfaces should be allowed to cure for at least 30 days prior to painting.

WOOD: Unpainted wood or wood in poor condition should be sanded smooth, wiped clean. Any knots or resinous areas must be primed before painting. Countersink all nails, putty flush with surface.

How To Use This Interior Paint:

Stir thoroughly. Apply with a high-quality brush, roller (nap size – 3/8" for smooth surfaces and up
to 3/4" for rough or textured surfaces), paint pad, or by spray equipment. For airless spray application, use tip size .015" to .021" and pressure range of 1500 to 2000 psi. When using more than one container of the same color, intermix to ensure color uniformity. Do not thin.
 
Application Temperature:

Stir thoroughly before using and occasionally when in use. When using more than one can of the same color, intermix to ensure color uniformity.

USE WITH ADEQUATE VENTILATION. KEEP OUT OF REACH OF CHILDREN. Read all label and Safety Data Sheet (SDS) information prior to use. SDS are available through our web site or by calling 1-800-441-9695.
Application Equipment: Apply with a high quality brush, roller, paint pad, or by spray equipment. Where necessary, apply a second coat and allow each coat to dry thoroughly before applying the next coat.
Airless Spray: Pressure range 1500 - 2000 psi, tip 0.015” - 0.021”. Spray equipment must be handled with due care and in accordance with manufacturer’s recommendation. High-pressure injection of coatings into the skin by airless equipment may cause serious injury.
Brush: Nylon/Polyester Brush
Roller: 3/8” - 3/4” nap roller cover
Thinning: Do not thin.
Permissible temperatures during application:
Material: 50 to 90ºF 10 to 32ºC
Ambient: 50 to 90ºF 10 to 32ºC
Substrate: 50 to 90ºF 10 to 32ºC

Drying Time For This Interior Paint:

Dry time @ 77ºF (25ºC); 50% relative humidity.
To Touch: 30-60 minutes
To Recoat: 2-4 hours
To Full Cure: 30 days
Drying times listed may vary depending on temperature, humidity, film
build, color, and air movement.

Coverage:

Approximately 300 to 400 sq. ft. (28 to 37 sq. meters) per U.S. Gallon (3.78L) on smooth, nonporous surfaces.
Wet Film Thickness: 4.0-5.3 mils
Wet Microns: 102-135
Dry Film Thickness: 1.8-2.3 mils
Dry Microns: 46-58

Coverage figures do not include loss due to surface irregularities and
porosity or material loss due to application method or mixing. Some colors,
drastic color changes, or porous surfaces may require additional
coats to achieve a uniform finish.

Cleanup: 

Clean tools with warm, soapy water.
 
Recommended Substrates:

Ideal for use on properly prepared, interior walls, ceilings, or trim composed of new or previously
painted drywall, plaster, masonry, wood, and metal.

Warning: 

Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Ratings & QA

Reviews and Ratings
Questions and Answers
  • bvseo_sdk, net_sdk, 3.2.0.0
  • CLOUD, getReviews, 0ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
  • bvseo_sdk, net_sdk, 3.2.0.0
  • CLOUD, getContent, 0ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Technical Information

Code
Finish
Base
Sizes
Download
PPG53-110
Flat
1
1 Gal
Select
Code
Finish
Base
Sizes
Download
PPG53-110
Flat
1
Quart
Select
Code
Finish
Base
Sizes
Download
PPG53-110
Flat
1
5 Gal
Select
Code
Finish
Base
Sizes
Download
PPG53-120
Flat
2
1 Gal
Select
Code
Finish
Base
Sizes
Download
PPG53-120
Flat
2
Quart
Select
Code
Finish
Base
Sizes
Download
PPG53-140
Flat
3
1 Gal
Select
Code
Finish
Base
Sizes
Download
PPG53-140
Flat
3
Quart
Select
CHAT
Open Glidden Color Coach
Glidden Color Coach