Surface must be clean and dry. Remove all loose and peeling paint, dirt, grease and any other surface contaminants. Putty all nail holes and caulk all cracks and open seams. Sand all glossy, rough and patched surfaces. Masonry and plaster surfaces must be allowed to cure for 30 days prior to painting. Uncoated substrates, repaired surfaces or lightly stained areas may require additional coats. For severe stains, water marks, and other challenging conditions use the appropriate primer.
Stir thoroughly. Apply with a high quality brush, roller, paint pad or by spray equipment. For airless spray application, use tip size .015"–.021" and pressure range of 1500 – 2000 psi. When using more than one container of the same color, intermix to ensure color uniformity. Do not thin. Apply only when air, product, and surface temperatures are between 50°F (10°C) and 90°F (32°C).
Apply only when air, product, and surface temperatures are between 50°F (10°C) and 90°F (32°C).
Normally dries to touch in 30–60 minutes at 77°F (25°C) and 50% relative humidity. Allow four hours before recoating. Drying times listed may vary depending on temperature, humidity, color, lm build, and air movement. Wait at least 30 days after painting before cleaning the surface with a non-abrasive, mild cleanser. Very deep colors may require longer to fully cure.
Approximately 300–400 sq. ft. (28–37 sq. meters) per U.S. gallon (3.78 Liters) on primed, smooth, nonporous surfaces. Coverage gures do not include material loss due to application. Some colors, drastic color changes, or porous surfaces may require additional coats to achieve a uniform finish.
Clean tools with warm, soapy water. Clean spills right away with a damp cloth.
Ideal for use on properly prepared interior walls, ceilings, or trim. Use on properly prepared or previously painted drywall, plaster, masonry, wood and metal surfaces.
Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.