Glidden^® PVA Primer

Area Preparation:

All surfaces must be sound, dry, clean and free of oil, grease, dirt, mildew, form release agents, curing compounds, loose and  aking paint and other foreign substances.

Application:

Mix thoroughly before use. May be applied by brush, roller or spray. No thinning required. For airless spray, use a .015” tip. Adjust pressure as needed. Do not apply when the surface or air temperature is below 50°F (10°C). Provide good ventilation and warmth for normal drying.
 
Application Temperature:

Do not apply when the surface or air temperature is below 50°F (10°C).

Drying Time:

At 77°F (25°C) and 50% R.H., dries to touch in 30 minutes and to recoat in two hours. Low temperature, high humidity, thick  lms or poor ventilation will increase these times.

Coverage:

Apply at 250-300 sq ft/gal (6-7 m2/L). Actual coverage may vary depending on
substrate and application method.

Cleanup: 

Clean hands and tools immediately with warm, soapy water. Clean spills right away with a damp cloth.
 
Recommended Substrates:

Use as an interior sealer on properly prepared interior wallboard and drywall surfaces.
May be top coated with alkyd or latex paints.

Warning: 

Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.