Surface must be clean and dry. Remove all loose, peeling paint, dirt, grease, and any other surface contaminants. Putty all nail holes and caulk all cracks and open seams. Sand all glossy, rough and patched surfaces. Repaired surfaces or lightly stained areas may require additional coats. Prime all bare wood, drywall, plaster, masonry, metal and porous surfaces with the appropriate primer.
Mix thoroughly before use. May be applied by brush, roller or by spray equipment. For airless spray application, use tip size .015" - .021" and pressure range of 1500 – 2000 psi. When using more than one container of the same color, intermix to ensure color uniformity. Do not thin. Apply when air, product and surface temperatures are above 50°F (10°C).
Apply when air, product and surface temperatures are above 50°F (10°C).
Normally dries to touch in 30 minutes at 77°F (25°C) and 50% relative humidity. Allow 4 hours before recoating. Drying times listed may vary depending on temperature, humidity, color, lm build and air movement. Wait at least 30 days after painting before cleaning the surface with a non-abrasive, mild cleaner. Very deep colors may require longer to fully cure.
Approximately 300-400 sq. ft. (28-37 sq. meters) per U.S. gallon (3.78 L) on primed, smooth, nonporous surfaces. Coverage gures do not include material loss due to application. Some colors, drastic color changes, or porous surfaces may require additional coats to achieve a uniform finish.
Clean tools immediately with warm, soapy water.
Ideal for use on properly prepared interior walls and ceilings. Use on properly prepared and primed or previously painted drywall, plaster, masonry, wood, and metal surfaces.
Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.