Area Preparation:
Surface must be clean and dry. Remove all loose, peeling paint, dirt, grease, and any other surface contaminants. Putty all nail holes and caulk all cracks and open seams. Sand all glossy, rough and patched surfaces. Plaster, concrete and masonry surfaces must be completely dry, free of efflorescence and allowed to cure for 30 days prior to painting. Prime all bare wood, drywall, plaster, masonry, metal and porous surfaces with an appropriate primer. WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NOISH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.
Application:
Stir thoroughly. When using more than one container of the same color, itermix to ensure color uniformity. Do not thing. Apply with a high quality brush, roller, paint pad, or by airless spray equipment. For airless spray application, use tip size .015"-.021" and pressure range of 1500-2000 psi.
Application Temperature:
Apply only when air, product, and surface temperatures are between 50°F (10°C) and 90°F (32°C).
Drying Time:
Dry time at 77°F and 50% relative humidity. To Touch: 30 minutes To Recoat: 2 hours Drying times listed may vary depending on temperature, humidity, color, film build, and air movement. Wait at least 30 days after painting before cleaning the surface with a non-abrasive, mild cleanser.
Coverage:
Approximately 300 - 400 sq. ft. (27.9 - 37.2 sq. meters) per U.S. gallon (3.78 Liters) on primed, smooth, nonporous surfaces. Coverage figures do not include loss due to material loss due to application. Some colors, drastic color changes, or porous surfaces may require more than one coat to achieve a uniform finish.
Cleanup:
Cleanup tools with warm, soapy water.
Recommended Substrates:
Interior walls, ceilings, or trim composed of new primed or previously painted drywall, plaster, masonry, wood and metal.
Warning:
Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.