4 Steps for a Great Spray Paint Job
Using spray paint for furniture or other DIY projects is a simple and effective way to achieve a flawless result. By preparing the surface, choosing the right paint, and applying it in a steady, sweeping motion, you can create a smooth and even finish. It's important to allow the paint to dry completely before touching or moving the object. Consider using stencils or masking tape for additional designs, and applying a clear topcoat or sealant for added protection. By following these steps, you can transform your furniture or DIY projects with ease.
Glidden Max-Flex spray paint products
Gather Your Supplies
To start, you'll need a can of dependable spray paint to fit your project goals. If you're painting wood, plastic, metal, vinyl, or anything with a previously painted surface, Glidden Max-Flex All Surface will get the job done. Use Max-Flex Exterior Fabric for textiles like leather, fabric, or rugs.It's also good to have a tarp or dropcloth, which will help protect your area from overspray. If you're short on supplies, use newspaper as a temporary protective covering. Put it down on the floor and lay whatever you're spraying on top of it. It can help to use some painter's tape if you're laying the newspapers down.
See These Do's and Don'ts for spray paint
Spray painting flower pot
Prep Your Work Area
You should paint in a well-ventilated work area, such as outside or in an open garage, with plenty of space. Using painter's tape, fasten the floor covering (tarp, drop cloth, or newspaper) to the ground at all four corners. This should prevent it from shifting around while you're working with the paint.A sawhorse may be easier to use, especially if you're working with a larger object outdoors. Suspend the object you're going to paint between two sawhorses for added stability.
Learn Spray Paint Best Practices
Cleaning chair
Clean the Item's Surface
Be sure to clean whatever you'd like to paint before spraying it with anything. The cleaner the object, the better the paint will adhere to the surface.Most items just need to have the dust* swept off of them. You can simply wipe them down using a household cleaner, and then you can dry them with a microfiber cloth.
Dirtier items might need something a little stronger to remove all the residue. The remnants of stickers tend to be particularly difficult. You can use a mild solvent to remove most grime. Try scraping sticker residue using a sharp blade.
See Spray Paint Colors
Glidden Max-Flex spray paint can
Using a Can of Spray Paint
It's time to use your spray paint. Vigorously shake the can for about 1-2 minutes before you plan to use it.Hold the can 6-10 inches away from the object's surface. Then, making a sweeping motion, spray the whole object, slightly overlapping after each pass. Do your best to keep a smooth, steady pass as you spray. Glidden Max-Flex cans have a specialized spray pattern to aid in even application.
If you're using Max-Flex, you only need to wait 5-10 minutes before you add the next coat. Apply at least three layers of paint using the same steps. The last thing you can do is add a layer of clear coat to help seal everything. Use the same spraying techniques to apply at least two layers of Glidden Max-Flex Clear Topcoat.
See More Spray Paint Techniques
Always use spray paint in a well-ventilated area.
*WARNING! If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.