Glidden® One Coat Exterior Paint + Primer

  • bvseo_sdk, net_sdk, 3.2.0.0
  • CLOUD, getAggregateRating, 47ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Glidden® One Coat exterior acrylic paint has one coat coverage* to save you time and money with uncompromising durability to handle Mother Nature’s attacks. Featuring a hand selected palette of over 300 of our most popular colors, one easy coat is all you need! *One coat coverage only when tinted to colors specified for Glidden One Coat Exterior. Looking for the interior version of this product? Click here.

Sheens: Flat, Satin, Semi-Gloss
Sheens:
This product is available in the sheens listed. Available options are listed from least shiny to most shiny. For help selecting which options is right for you search "sheen guide"
Sizes: 1 Gal, 5 Gal
Sizes:
This product is available in the sizes listed. For help determining how much paint you need for your project search "paint calculator"

Order Online

Step . Choose Color

Step . Choose Size

Step . Choose Sheen

Step . Choose Retailer

Benefits

Excellent cracking and peeling resistance

Resists damage to your finish caused by changes between summer heat, winter cold and anything else Mother Nature has up her sleeve.

Exceptional fade resistance

Consistent, true color finish throughout the lifetime of your project in sunny and shady areas.

One Coat Coverage

One coat coverage means you save time and money because you only have to apply one coat* *Coverage applies only when tinted to colors specified for Glidden One Coat interior paints

Details

Area Preparation: 

Surfaces to be coated must be clean and dry. Remove all loose, peeling paint, dirt, mildew, grease, oil, chalk, rust, and any other surface contaminants. Repair all moisture problems. Blistering and peeling issues are commonly caused by moisture behind the paint film. Putty all nail holes and caulk all cracks and open seams. Sand all glossy, rough and patched surfaces. Stucco, concrete and masonry surfaces must be completely dry, free of efflorescence and allowed to cure for 30 days prior to painting. The appropriate primer is recommended for all uncoated surfaces and special substrates such as tannin staining wood, preprimed and unprimed hardboard, new or chalky masonry, and bare metal. WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NOISH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.

Application: 

Stir thoroughly. Apply with a high quality brush, roller, paint pad, or by spray equipment. When using more than one container of the same color, intermix to ensure color uniformity. Do not thin.

Application Temperature: 

Apply only when air, product, and surface temperatures are between 50°F (10°C) and 90°F (32°C) and at least 5°F (3°C) above the dew point. Air and surface temperatures must remain between 50°F (10°C) and 90°F (32°C) for the next 48 hours. Avoid painting in direct sunlight or on hot surfaces. Do not apply late in the date when dew and condensation are likely to form or if rain or snow is expected.

Drying Time:

Dry time at 77°F and 50% relative humidity, To Touch: 30 minutes   To Recoat: 4 hours Drying times listed may vary depending on temperature, humidity, color, film build, and air movement.

Coverage:

Approximately 300 - 400 sq. ft. (27.9 - 37.2 sq. meters) per U.S. gallon (3.78 Liters) on primed, smooth, nonporous surfaces. Coverage figure do not include loss due to surface irregularities and porosity, or material loss due to application method or mixing. Some colors, drastic color changes, or porous surfaces may require more than one coat to achieve a uniform finish.

Cleanup: 

Cleanup tools with warm, soapy water.

Recommended Substrates:

Exterior wood, brick, masonry, concrete, weathered aluminum, weathered vinyl siding, and primed metal surfaces.

Warning: 

Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Reviews & Questions

Reviews and Ratings
Questions and Answers
  • bvseo_sdk, net_sdk, 3.2.0.0
  • CLOUD, getReviews, 0ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
  • bvseo_sdk, net_sdk, 3.2.0.0
  • CLOUD, getContent, 0ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Technical Information

Code
Finish
Base
Sizes
Download
GLOEX10WH
Flat
1 Gal
Select
Code
Finish
Base
Sizes
Download
GLOEX10WB
Flat
1 Gal / 5 Gal
Select
Code
Finish
Base
Sizes
Download
GLOEX10MB
Flat
1 Gal / 5 Gal
Select
Code
Finish
Base
Sizes
Download
GLOEX10DB
Flat
1 Gal
Select
Code
Finish
Base
Sizes
Download
GLOEX40WH
Satin
1 Gal
Select
Code
Finish
Base
Sizes
Download
GLOEX40WB
Satin
1 Gal / 5 Gal
Select
Code
Finish
Base
Sizes
Download
GLOEX40MB
Satin
1 Gal / 5 Gal
Select
Code
Finish
Base
Sizes
Download
GLOEX40DB
Satin
1 Gal
Select
Code
Finish
Base
Sizes
Download
GLOEX30WH
Semi-Gloss
1 Gal
Select
Code
Finish
Base
Sizes
Download
GLOEX30WB
Semi-Gloss
1 Gal / 5 Gal
Select
Code
Finish
Base
Sizes
Download
GLOEX30MB
Semi-Gloss
1 Gal / 5 Gal
Select
Code
Finish
Base
Sizes
Download
GLOEX30DB
Semi-Gloss
1 Gal
Select
CHAT
Open Glidden Color Coach
Glidden Color Coach